Back to all articles
Guide

How to Dismantle a Corner Sofa for Moving, Step by Step

Quick summary (November 2026): Most corner sofas come apart into two or three sections, because they’re built to be delivered in pieces. To dismantle a corner sofa, take the cushions off, look underneath where the sections meet, release the connector (usually a metal bracket that lifts out of a slot, a clip, or a bolted plate) and lift one section straight up and away rather than pulling it sideways. Unscrew the feet as well, so the sections are lower and don’t catch on door frames. An electric recliner corner sofa needs unplugging first, and the power cables between the sections disconnecting before anything is lifted. With The Van Man Co, the driver brings blankets, straps and a trolley to protect the sections on the way. To book a driver for a sofa move in Kent, start with the Maidstone man and van page.

A corner sofa looks like one big piece of furniture, but most of them aren’t. They’re usually two or three sections that hook together, which is basically how it got into your living room in the first place. Taking it apart is fairly straightforward once you know where the joints are and which way they come apart.

This guide covers finding the connectors, separating the sections without snapping anything, what to do with recliners and sofa beds, and putting it back together at the other end.

Do corner sofas come apart?

Most do. A corner sofa is normally a corner unit plus one or two side sections, sometimes with a chaise end, joined at the seams so the whole thing can come through an ordinary front door. If you can see a line running down the back and through the seat where two parts meet, there’s almost certainly a joint there.

A few don’t. Some smaller corner sofas are built on one fixed frame, and some were put together with screws through the frame that were never meant to come out. If you’ve looked underneath and can’t find a connector, check the paperwork or the maker’s care guide before forcing anything. If it really is one piece, our guide to getting a sofa through the door and into the van covers measuring and angling it out.

What you’ll need

Usually nothing more than your hands. Most connectors release without tools. It’s still worth having a torch for looking underneath, a screwdriver and a set of Allen keys in case the brackets are screwed on, a few sandwich bags and a marker for the feet and fixings, and a second person. A corner section isn’t always heavy, but it’s an awkward shape to lift on your own.

Get a price for your move

Choose a service

Prefer to talk it through? Call 0330 043 0885

Man & vanInstant price

Where does your driver need to go?

How long do you need the driver at each end?

Example: 30 mins to load + 30 mins to unload = select 1 hour

Estimate

Enter details and click “Get a quote”.
Full removalsCustom quote
Submitting Your Request
Please wait while we upload your files...

Tell us about the move

Share the key details so we can plan the route.

This form is for full household moves.

Moving just some of your things? Get an instant man and van price. You can pick a Luton van there.

Our removalists box up your loose items — clothes, kitchenware, books, ornaments. Choose No if you'll box these up yourself.

A quick walkthrough video helps us recommend the right van size and give you an accurate quote. Just a 1-minute phone video of each room showing what's coming and what's staying works perfectly.

Drag and drop or select videos/photos. Each file will stack below—remove any with the × button. Videos up to 50 MB. Got a bigger one? Send it to us on WhatsApp 0330 043 0885 and we'll attach it to your enquiry.

    Moving from and to

    Tell us about the property types and locations.

    Moving From

    Moving To

    How do we reach you?

    We’ll confirm availability after a quick review.

    How to dismantle a corner sofa, step by step

    1. Take the cushions off

    All the seat and back cushions come off first, along with any loose arm covers. The sections get lighter and you can see the seams properly. Bag the cushions up so they stay clean in the van.

    2. Find the connectors

    Tip the sofa back gently, or get down on the floor with the torch, and look underneath where the sections meet. You’re usually looking for one of these:

    • Bracket and slot. A metal bracket on one section drops into a slot on the other. Lift one section up and the bracket slides out.
    • Clips. Plastic or metal clips that hook together along the base. They release by lifting or squeezing.
    • Bolted plates. A flat plate screwed or bolted across the joint. These need the screwdriver or an Allen key.
    • Zips or Velcro. Some modular sofas join the fabric of the seat or back as well as the frame. Undo these before you lift.

    There’s usually a connector at the front and another at the back of each joint. Find all of them before you start lifting.

    3. Lift, don’t pull

    With someone on each section, lift the side section straight up until the bracket clears the slot, then move it away. Pulling it sideways while it’s still hooked on is how brackets bend and frames split. Don’t shake it to loosen a stiff clip either, because plastic clips snap. If a section won’t come, there’s usually a second connector you’ve missed, so look again.

    4. Take the feet off

    Most sofa feet unscrew by hand. Take them off, bag them and tape the bag to the underside of the section they came from. Without feet the sections sit lower, they’re easier to angle through a doorway, and the feet can’t snap off in the van.

    5. Bag the fixings and take photos

    Any brackets, bolts or plates that came off go in a labelled bag, taped to the section they belong to. Take a photo of each joint before you separate it. It saves a lot of guessing when you’re putting it back together in a different living room.

    Recliners and corner sofa beds

    Electric recliner corner sofas

    Unplug it at the wall first. Then follow the power cables underneath. They usually run between the sections and join with a plug-in connector, so separate those before anything gets lifted apart. Keep the power supply, cables and any control or USB units together in one labelled bag.

    On a lot of recliners the backrest lifts off too, normally by releasing a lever or clip inside the back and sliding it up. That makes each section a good deal lighter. Check the manual for your model before you try it. And lift a recliner section by its frame, never by the footrest or the mechanism.

    Corner sofa beds and storage chaises

    The bed mechanism stays inside its section. Make sure it’s fully folded away, and strap it closed if it tends to spring open. Empty a storage chaise before it moves, and if the lid lifts on gas struts, close it and tie it shut so it can’t open while it’s being carried.

    Getting the sections out and into the van

    Measure the biggest section, which is usually the corner unit, against your doorways and the turn at the bottom of the stairs before you lift it. A section that won’t go through flat will often go through on its end, angled round the frame.

    Wrap each section in blankets or an old duvet before it goes anywhere near a door frame. The corners of the frame take most of the knocks, and fabric marks easily on brickwork and door hinges. Plan the route first, keep the section close and turn with your feet rather than twisting, which is what HSE’s lifting advice comes down to.

    In the van, sections stand on end or lie seat down, with nothing heavy stacked on top, and get strapped to the side so they can’t slide. Our guide on how to secure furniture in a van goes through it. If the sofa is going with the rest of the house, the van size calculator shows your list loaded into each van, as a guide to which one you need.

    Some drivers will separate a corner sofa as part of the job, but it varies by driver and it adds to the loading time, so it’s quicker to have it apart before they arrive. If you’re moving in or around Maidstone, you can get a price on our man and van service in Maidstone.

    Putting it back together

    Do it in the room it’s staying in. Start with the corner unit in place against the wall, then bring each side section up to it and lower it so the bracket drops into its slot. If a connector won’t line up, the floor is usually uneven or one section is sitting slightly lower. Lift that section a little and try again, or slide a felt pad under a foot. Feet go back on before the sections join, cushions last.

    If the sofa isn’t coming with you

    A move is a good time to get rid of an old sofa, but sofas aren’t treated like other bulky waste. Upholstered seating can contain persistent organic pollutants (POPs) from old flame retardants, and GOV.UK’s guidance on waste upholstered seating says it has to be kept separate from other waste. Councils ask for sofas to be left whole where possible, so don’t cut one up for the bin. If it’s in decent condition, our guide on where to donate furniture covers who takes sofas.

    FAQs

    Do corner sofas come apart?

    Most do. They’re usually made of two or three sections joined underneath by brackets, clips or bolted plates, so they can be delivered through a normal door. A few smaller ones are built on one fixed frame.

    Do I need tools to take apart a corner sofa?

    Often not. Bracket-and-slot joints and clips release by hand, and the feet unscrew by hand. Bolted plates need a screwdriver or Allen key, so have both nearby.

    Why won’t my corner sofa separate?

    Usually there’s a second connector you haven’t found, often at the back of the joint, or a zip joining the fabric. It can also be that you’re pulling sideways instead of lifting. Lift the section straight up and the bracket should come free.

    Can one person dismantle a corner sofa?

    One person can take the cushions and feet off and release the connectors. Lifting the sections apart and carrying them is a two-person job, because they’re awkward to hold and easy to drop on a door frame.

    Written by

    Dom McBride

    Get In Touch

    Speak to our team about your move

    Call

    0330 043 0885 0330 043 0885
    Call